Download M-horse Butterfly 3 Stock ROM

Below is the direct link to download the M-horse Butterfly 3 Stock ROM (Firmware).
DOWNLOAD M-HORSE BUTTERFLY 3 STOCK ROM

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can’t power on, can’t charge and will not be detected by a computer).

M-HORSE BUTTERFLY 3 SPECS
Operating System Android 4.4.2 (Kitkat)
Chipset MediaTek MT6582M & Spreadtrum SC8810
Processor CPU: 1.3GHz Qudl-core, GPU: Mali-400 MP2
Storage RAM: 512MB, ROM: 4GB, up to 32GB micro SD
Dimension 137 x 71.1 x 10.8 mm
Connectivity
Wi-Fi: 802.11 b/g/n, Hotspot, 2G: GSM, 3G: HSDPA, Bluetooth, Micro USB 2.0
Camera
Rear Camera: 5MP, Front Camera: 2MP

Battery Capacity 2000mAh

M-HORSE BUTTERFLY 3 STOCK ROM
Flash ID: 002C00BC9055
Flash Type: [Micron] MT29C4G48MAZAPAKD
FLASH LEN: 0x20000000

– android spd 8810/6820 chip –
DOWNLOAD FIRMWARE

Flash the above firmware using Miracle Box, Volcano Box or GPG Dragon Box e.t.c


F8_JHM_butterfly_3_5991G_APK_NG_NEW_V00_20170417_DOUBLECARD
DOWNLOAD ROM

F8_JHM_butterfly_3_5991G_APK_NG_V07_20161123_DOUBLECARD
DOWNLOAD ROM

F8_JHM_butterfly_3_5990_APK_NG_NEW_MD_V03_20170426_DOUBLECARD
DOWNLOAD ROM

JHM_butterfly_3_APK_256_91_NG_V04_20160811_DOUBLECARD
DOWNLOAD ROM


Password to extract file is: M-h_btf3_romshillzz


Learn how to easily download files from MEGA cloud storage
PC or Moblile

How To Flash

Using ResearchDownload or UpgradeDownload Tool:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch ResearchDownload or UpgradeDownload.
STEP 4: Click on the Settings-like button above Port.
STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded.
STEP 6: Click on Start button.
STEP 7: Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
STEP 8: Patiently wait for the process to complete.


Using Miracle Box:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch Miracle Box.

STEP 4: Click on SPD.

STEP 5: Select Write.

STEP 6: Select device Chip from Choose type.

STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved.

STEP 8: After Selecting Stock ROM (Firmware),

STEP 9: Click on the Start button.

STEP 10: Connect device holding volume + and volume – key or power key only.
STEP 11: When device is connected, Select Block will pop-out, Click OK.

STEP 12: Patiently wait while the process completes.

Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can’t power on).

==>> Learn how to backup Stock ROMs (Firmware’s) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report if you cannot download this file.

Load Comments

Copyright © 2016-2020 RomShillzz. All Rights Reserved.  | Hosted on Siteground.