Download M-horse Nova 5 Stock ROM

Below is the direct link to download the M-horse Nova 5 Stock ROM (Firmware).
DOWNLOAD M-HORSE NOVA 5 STOCK ROM

Note:
Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader will make the device completely dead (can’t power on, can’t charge and will not be detected by a computer).

M-HORSE NOVA 5 SPECS
Operating System Android 5.1 (Lollipop)
Chipset Spreadtrum SC7731
Processor CPU: 1.0GHz Dual-core, GPU:
Storage RAM: 256MB, ROM: 256MB, up to 32GB micro SD
Dimension 131 x 68.1 x 10.8 mm
Connectivity
Wi-Fi: 802.11 b/g/n, WiFi, Bluetooth, USB 2.0
Camera
Rear Camera: 5MP, Front Camera: 2MP

Battery Capacity 2000mAh

M-HORSE NOVA 5 STOCK ROM
JHM-NOVA5-2017.4.11-V04-Duble_CARD
DOWNLOAD ROM

JHM-NOVA5-MD-20170217-V01-Duble_CARD
DOWNLOAD ROM


Learn how to easily download files from MEGA cloud storage
PC or Moblile

How To Flash

Using ResearchDownload or UpgradeDownload Tool:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch ResearchDownload or UpgradeDownload.
STEP 4: Click on the Settings-like button above Port.
STEP 5: Select the PAC File from the Stock ROM (Firmware) you have downloaded.
STEP 6: Click on Start button.
STEP 7: Connect device >> holding volume + and volume – button of your device at the same time or holding power button only.
STEP 8: Patiently wait for the process to complete.


Using Miracle Box:

STEP 1: Download & extract the Stock ROM (Firmware) on your computer.
STEP 2: Install the USB Drivers (skip this step if drivers are already installed).

STEP 3: Launch Miracle Box.

STEP 4: Click on SPD.

STEP 5: Select Write.

STEP 6: Select device Chip from Choose type.

STEP 7: Click on the folder-like button to select Stock ROM (Firmware) on the location it is saved.

STEP 8: After Selecting Stock ROM (Firmware),

STEP 9: Click on the Start button.

STEP 10: Connect device holding volume + and volume – key or power key only.
STEP 11: When device is connected, Select Block will pop-out, Click OK.

STEP 12: Patiently wait while the process completes.

Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can’t power on).

==>> Learn how to backup Stock ROMs (Firmware’s) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.

Please Leave a comment after using this ROM
Report if you cannot download this file.

Load Comments

Copyright © 2016-2020 RomShillzz. All Rights Reserved.  | Hosted on Siteground.