Below is the direct link to download the Infinix Note 3 X601 Stock ROM (Firmware). Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device. Make sure you are downloading the exact firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (can’t power on, can’t charge and will not be detected by a computer).
Download Infinix Note 3 X601 Stock ROM (Firmware)
File Name: Infinix_Note_3_X601_H536A1_N_TEST_170120V95
File Size: 1 GB
How To Flash: Follow Instruction
File Name: Infinix_Note_3_X601_H537A1_N_TEST_170120V48
File Size: 1 GB
How To Flash: Follow Instruction
Tcard Update
File Name: Tcard_Pack_H536_N_A1
File Size: 1 GB
How To Flash: Copy the update.zip file to an SD Card, insert the SD Card to the device and flash device through recovery mode.
File Name: Tcard_Pack_H537_N_A1
File Size: 1 GB
How To Flash: Copy the update.zip file to an SD Card, insert the SD Card to the device and flash device through recovery mode.
How To Flash
Step 1: Download & extract the Stock ROM (Firmware) on your computer.
Step 2: Open the extracted folder, there you will get the firmware of the device.
Step 3: Make sure you install USB Drivers on your Computer to ensure that the device gets connected (skip this step if drivers are already installed).
Step 4: Launch the Tool required, Select the firmware and flash your device.
Important Notes:
[*] Take a backup: All data on your device gets wiped after flashing so take a backup of your personal data before flashing or installing the new firmware. As this ease you to recover them whenever any thing wrong happens.
[*] Read flash: It is always advisable to backup the firmware of the device you are about to flash unless the device is completely dead (can't power on).
[*] Read me: Make sure you read & follow this tips & guides before you completely proceed to flashing your device. These tips are very important to be ignored.