Below is the direct link to download the Itel IT1351E Stock ROM (Firmware). Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device. Make sure you are downloading the exact firmware of the device you want to flash because flashing a wrong firmware will make the device completely dead (can’t power on, can’t charge and will not be detected by a computer).
File Name: Itel_IT1351E_7710_4.1.2_C913W_AITAI_1351_en_v09
File Size: 164 MB
How To Flash: Follow Instruction
How To Flash
Step 1: Download & extract the Stock ROM (Firmware) on your computer.
Step 2: Open the extracted folder, there you will get the firmware of the device.
Step 3: Make sure you install USB Drivers on your Computer to ensure that the device gets connected (skip this step if drivers are already installed).
Step 4: Launch the Tool required, Select the firmware and flash your device.
[*] Password: Please not that all Firmware on this site are password free, if any is password protected it would be included or given. This file is Password Protected due to Copyrights. Drop your email on the comment box and the password will be sent your email.
[*] Take a backup: All data on your device gets wiped after flashing so take a backup of your personal data before flashing or installing the new firmware. As this ease you to recover them whenever any thing wrong happens.
[*] Read flash: It is always advisable to backup the firmware of the device you are about to flash unless the device is completely dead (can't power on).
[*] Read me: Make sure you read & follow this tips & guides before you completely proceed to flashing your device. These tips are very important to be ignored.