Before you should completely proceed in flashing any Mobile Device, there are certain things (tips & observations) you need to do before going straight to flashing.
What is Flashing? This is the process of changing or writing new Stock ROM, Firmware or OS into a device.
FAQ’s Does flashing have any effect after been carried out? Answer 1. Flashing has no negative effect after been carried out. 2. Note that after flashing a device all user data {apps, pictures, contacts e.t.c (anything saved on the phones storage memory)} are been wiped out of the device, leaving no single thing left apart from the one’s coming with the new ROM. 3. You will experience changes on the device like carry out all setting afresh Bellow are some tips, guides & points you need to consider before completely flashing any device.
STEPS >>
#1. It is always advisable to backup the Stock ROM/Firmware of the device you are about to flash unless the device is completely dead (can’t power on).
==>> Learn how to backup Stock ROMs/Firmwares Before flashing from here
#2.Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.
#3. Always make sure your battery is fully charged or at–least 35% charged before carrying out any flashing process.
#4. Note that some times ifa device stock on boot (does not boot completely), firstly, perform a hard reset. If the issue persist the you cam go on in the flashing process.
#5. If a device is passworded, there is no need writing flash (flashing with a Stock ROM or Firmware) Do as follows:
Tick Auto-detect Pinouts (When using Pinout Cable)
UntickAuto-detect Pinouts (When using USB Cable)
Connect Device >> pressing and holding the device boot key, plug USB Cable
Click on Run Button
Patiently wait for device to be detected and get connected
Once device has been detected and get connected, Reading Begins..
Patiently wait for process to be completed until it shows Reading Completed.
After Reading Flash do not disconnect device >> you can now format device by the steps bellow
> Select the Firmware you have just backed-up > Select Format >Click on RunButton > Patiently wait for device to be detected and get connected > Once device has been detected and get connected, Format Begins.. > Patiently wait for process to be completed until it shows >> Set to Factory successfully.
READING/UNLOCKING CODE:
*You must backup the Device Firmware before Unlocking or Reading Code