All X-BO Display Fix

Below is the direct link to download All X-BO Display Fix File Stock ROM (Firmware). Follow the instructions on how to flash this device carefully. We will not take any responsibility for whatever that may happen to your device.


Caution: Make sure you are downloading the exact display fix of your device.

Have you experienced or gotten a white screen or some other funny colours after flashing an X-BO device? Then note that this is caused as a result of flashing an lk.bin or uboot.bin file which does not match that of the device.

This can be also caused when a wrong firmware is been flashed into the device so be careful especially when you want to flash preloader because flashing a wrong preloader can also make the device completely dead (can't power on, can't charge and will not be detected by a computer).

Download All X-BO Display Fix File

File Name: X-BO Display Fix File
Password to Extract File: www.romshillzz.com | www.sithumobile.com
How to Flash: Select the firmware and flash your device using the Download Option only.

X-BO B3, M3 & V5

X-BO B3

X-BO M3 File 1

X-BO M3 File 2

X-BO V3+ File 1

X-BO V3+ File 2

X-BO V3+ File 3

X-BO V3+ Dead Boot and Display Fix

X-BO V3+ Sony Clone

X-BO V5

X-BO V6 Sony Clone

X-BO V7

X-BO V8+ File 1

X-BO V8+ File 2

X-BO V10

X-BO V11 File 1

X-BO V11 File 2

X-BO X15

X-BO X16


All X-BO Stock ROM (Firmware)

How to Flash

Step 1: Download & extract the Stock ROM (Firmware) on your computer.

Step 2: Open the extracted folder, there you will get the firmware of the device.

Step 3: Make sure you install USB Drivers on your Computer to ensure that the device gets connected (skip this step if drivers are already installed).

Step 4: Launch the Tool required (SP Flash Tool, Miracle Box or any other Tool that supports MediaTek devices), Select the firmware and flash your device using the Download Option only.

Important Notes:

[*] Take a backup: All data on your device gets wiped after flashing so take a backup of your personal data before flashing or installing the new firmware. As this ease you to recover them whenever anything wrong happens.

[*] Read flash: It is always advisable to backup the firmware of the device you are about to flash unless the device is completely dead (can't power on).

[*] Read me: Make sure you read & follow this tips & guides before you completely proceed to flashing your device. These tips are very important to be ignored.

Comments

Copyright © 2016-2019 RomShillzz.  | Teampose Inc. All Rights Reserved.