Tecno Y4 Dead After Flash Solution!

Learn how to unbrick/flash this device using sp flash tool from here

Note
Follow the instructions on how to flash the device carefully from the link above
I will not take responsibility on whatever may happen to your device.

Make sure you are downloading the exact ROM of the device you want to flash because
 flashing a wrong preloader, will make the device completely dead
(can’t power on, can’t charge and will not be detected by a computer)

TECNO Y4 QUICK SPECS

Android 4.4.2 (KitKat)

Dimensions – 140.2 x 74.5 x 10.6 mm
4.0-inch Touchscreen, 480 x 800 , IPS 233 ppi

1.0GHz dual-core Processor
Mali – 400MP2 GPU
MT6577

1GB RAM
8 GB Internal Memory
Supports up to 32GB microSD

5 MP Rear Camera, LED Flash, Auto Focus
0.3 MP Front Camera

Dual SIM
EDGE / GPRS
WCDMA
WIFI 802.11 b/g/n
bluetooth 3.0

1800mAh Battery


Click here to download TECNO Y4 STOCK ROMs

Reason Why Tecno Y4 Dead After flash?
This is because this device has many variant. it has different build,
Always check the build id of the device before you flash
There are 2 other builds of this device apart from
Y4-G220-A1-KK-20150320 & Y4-G220-A1-KK-TZ-TIGO-20150423 which are Y4-G220-A1-KK-R6-20150428 & Y4-G220-A1-KK-R6-20150728

How to Fix Tecno Y4 Dead After Flash ?
Just download the fix firmware below and flash using SP Flashtool, Miracle Box or CM II.

TECNO Y4 DEAD FIX

Use this file to fix / unbrick Tecno Y4 Dead After Flash

Y4-G220-A1-KK-R6-20150728
DOWNLOAD TECNO Y4 DEAD FIX FIRMWARE
Please Leave a comment after using this ROM
Report it you cannot download this file.


Copyright © 2016-2024 RomShillzz. All Rights Reserved.  | Hosted on Cloudways.